Available Finishes
Siding & Trim
Aluminum Fascia
1″ × 6″ × 12′
Pre-bent aluminum fascia cover for capping wood fascia board. 12-foot lengths cover a full standard rafter run cleanly.
Aluminum fascia cover, factory-bent to wrap a nominal 1×6 wood fascia board with a clean drip-leg face. 12-foot lengths run a full standard residential rafter section in one piece, eliminating mid-span seams. 0.5mm aluminum is the heavier end of residential trim coil — bends crisply, won't oil-can in long runs.
Key Spec1×6″ × 12′ · .020″
Aluminum Fascia Specifications
Profile1″ top return × 6″ face
Length12 feet per piece
MaterialAluminum trim coil
Thickness0.5mm (~.020″)
FinishPainted aluminum — Black or White
Compatible fascia boardNominal 1×6 wood fascia (¾″ × 5½″ actual)
Lap2" minimum at end-laps; expand-and-contract spacing on long runs
Use withAluminum soffit, F-channel, T drip edge